FPGA Development Engineer

8/2021 – offen

Building a graphical user interface between the PC and the FPGA as remote access instead of hardware managing platform using C#.

Bash Shell, C#, Tool Command Language, Hardwarebeschreibungssprache

9/2017 – 7/2021

I worked on implementing a transceiver using customized protocol. Research was held to find out the best method in capturing the received signal. My work was focused on simulating different techniques using MATLAB referring to benchmarked results. After choosing the appropriate technique, I implemented it on FPGA using VHDL taking into consideration timing constraints. Every code was placed in a testing environment where every update stimulate this environment to produce the success or failure of the
architecture. The hardware part was also attached with a software part where I established the MAC layer in C language.
Another project I worked on is the hardware module of an interferometer. This
project was proposed by well-known firm in lenses domain ZEISS. The architecture of this project was demonstrated in VHDL, and a detailed report covering testing results, constraints, and register mapping was submitted upon finalizing the whole model. The final project that I worked on in my current firm is Local Interconnect Network (LIN) core slave deployed on FPGA.

Firmware, Simulink, Hardwarebeschreibungssprache, Vivado (Xilinx)