freiberufler EMC Testing and simulation engineer auf freelance.de

EMC Testing and simulation engineer

offline
  • auf Anfrage
  • 68259 Mannheim
  • Europa
  • fr  |  en  |  ar
  • 02.06.2019

Kurzvorstellung

I am highly experienced professional (>8 years) in the EMC field looking for challenging opportunities dealing with EMC simulation, testing, investigation and design support and training.

Auszug Referenzen (4)

"I confirm that Mr KADERI has worked on window lifter equipment. He was in charge on this project to support the design of electronic Equipment."
EMC engineer on window lifter equiment
kahina Moustefaoui
Tätigkeitszeitraum

4/2018 – 9/2018

Tätigkeitsbeschreibung

Technical adviser for project teams on EMC issues:
 Analysis of customer’s specifications, participation to technical discussions, assessment of the EMC emission and immunity risks and producing the EMC preliminary risk analysis report
 Analysis of equipment characteristics and development of the test setups and writing the test plan based on the international standards (CISPR, ISO, EN 61000-4-x ...) and costumer specification
EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them

Follow-up of the tests in the qualification phase
 Represent the project team during the qualifying tests, ensure that the tests are carried out in accordance with the test plan and solve the potential problems due to the equipment
 Contribution to the development and improvement of testing facilities, creation and validation of new test methodologies. Proposals for investments in testing facilities.

Eingesetzte Qualifikationen

Reporting, FMEA (Failure Mode and Effects Analysis)

"I confirm that Mr KADERI has worked on Gear Motor Generator . He was in charge on this project to support the design of electronic Equipment."
EMC engineer on Gear Motor Generator
Kahina Kasri
Tätigkeitszeitraum

1/2018 – 5/2018

Tätigkeitsbeschreibung

EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them
Investigation of defects and limits exceeding in order to solve it during the prototyping phase
 Realization of electrical tests and simulations (LTspice, Simitrix) to highlight the reasons for emission exceeding and immunity defects
 Proposal of solutions and improvements ( filter design, layout improvement…) to ensure product compliance and optimize the solution with the design team
 Writing the investigation test report and presenting and explaining the results to design and project teams

Eingesetzte Qualifikationen

Reporting, FMEA (Failure Mode and Effects Analysis), Systems Simulation

"I confirm that Mr KADERI has worked on a heating system. He was in charge on this project to support the design/expertise of electronic Equipment."
EMC engineer on a heating system
Kahina Kasri
Tätigkeitszeitraum

9/2016 – 9/2017

Tätigkeitsbeschreibung

Technical adviser for project teams on EMC issues:
 Analysis of customer’s specifications, participation to technical discussions, assessment of the EMC emission and immunity risks and producing the EMC preliminary risk analysis report
 Analysis of equipment characteristics and development of the test setups and writing the test plan based on the international standards (CISPR, ISO, EN 61000-4-x ...) and costumer specification
 EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them
 Investigation of defects and limits exceeding in order to solve it during the prototyping phase
 Realization of electrical tests and simulations (LTspice, Simitrix) to highlight the reasons for emission exceeding and immunity defects
 Proposal of solutions and improvements ( filter design, layout improvement…) to ensure product compliance and optimize the solution with the design team
 Writing the investigation test report and presenting and explaining the results to design and project teams
 Follow-up of the tests in the qualification phase
 Represent the project team during the qualifying tests, ensure that the tests are carried out in accordance with the test plan and solve the potential problems due to the equipment
 Contribution to the development and improvement of testing facilities, creation and validation of new test methodologies. Proposals for investments in testing facilities.

Eingesetzte Qualifikationen

Reporting, FMEA (Failure Mode and Effects Analysis), Technisches Testing, Technisches Testmanagement / Testkoordination, Systems Simulation

"I confirm that Mr KADERI has worked on the On board charger (OBC). He was in charge on this project to support the design of electronic Equipment."
EMC engineer - On board charger (OBC) (Festanstellung)
Kahina KASRI
Tätigkeitszeitraum

9/2016 – 9/2017

Tätigkeitsbeschreibung

Technical adviser for project teams on EMC issues:
 Analysis of customer’s specifications, participation to technical discussions, assessment of the EMC emission and immunity risks and producing the EMC preliminary risk analysis report
 Analysis of equipment characteristics and development of the test setups and writing the test plan based on the international standards (CISPR, ISO, EN 61000-4-x ...) and costumer specification
EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them
Investigation of defects and limits exceeding in order to solve it during the prototyping phase
 Realization of electrical tests and simulations (LTspice, Simitrix) to highlight the reasons for emission exceeding and immunity defects
 Proposal of solutions and improvements ( filter design, layout improvement…) to ensure product compliance and optimize the solution with the design team
 Writing the investigation test report and presenting and explaining the results to design and project teams

Eingesetzte Qualifikationen

FMEA (Failure Mode and Effects Analysis), Projekt - Berichtswesen, Prüfingenieur, Prüfmittelmanagement, Prüfwerkzeuge

Qualifikationen

  • 3D electromagnetic Simulation
  • Composite materials EM expertise
  • EMC Design support
  • EMC test follow up and management
  • Expertise in the Automotive EMC field
  • Expertise on power electronic EMC issues
  • Satz6 J.
  • Starrkörpersimulationen
  • Systems Simulation8 J.
  • Technischer Support
  • Technisches Testing7 J.
  • Technisches Testmanagement / Testkoordination7 J.
  • Training - Coaching-Kompetenzen

Projekt‐ & Berufserfahrung

EMC Expert - Wireless Power Transfer (WPT) (Festanstellung)
Bombardier Primove, Mannheim
10/2018 – offen (6 Jahre, 2 Monate)
Automobilindustrie
Tätigkeitszeitraum

10/2018 – offen

Tätigkeitsbeschreibung

EMC activity lead and management toward the certification (CE, Red and FCC) and qualification of the radio application of the WPT system
 Intervention on a project in crises to achieve compliance
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the process validation phase and suggestion of several solutions to improve the EMC behavior of the WPT system
 Follow up of the TÜV EMC certification and radio applications qualification tests
 Definition of the test plan and correction of the emission tests setups in process validation phase
 Discussion of the applicability of the standard with the EMC laboratory
 Represent Bombardier during certification discussions regarding the applicable standard on WPTEMC
 EMC test schedule at TÜV and internally and baseness travels organisation

Design support for the wireless power transfer project
 Investigation (EMC measurement, LTspice simulation, components and filter characterization…) of defects and limit’s exceeding
 Being responsible of the mitigation solutions finding to achieve compliance regarding to the international standard with a minimum cost rise and layout changes
 Layout review, identification layout errors, evaluate their effect and suggestion of the necessary layout improvements

Lead and development of the under-construction EMC laboratory
 Material inventory and missing material submission for purchasing
 Setting up a running test facilities with the existing measurement material and conduct the necessary investigation for compliance achievement

Eingesetzte Qualifikationen

Satz, Technisches Testing, Technisches Testmanagement / Testkoordination, Systems Simulation

EMC engineer on window lifter equiment
VALEO, CRETEIL
4/2018 – 9/2018 (6 Monate)
Automobilindustrie
Tätigkeitszeitraum

4/2018 – 9/2018

Tätigkeitsbeschreibung

Technical adviser for project teams on EMC issues:
 Analysis of customer’s specifications, participation to technical discussions, assessment of the EMC emission and immunity risks and producing the EMC preliminary risk analysis report
 Analysis of equipment characteristics and development of the test setups and writing the test plan based on the international standards (CISPR, ISO, EN 61000-4-x ...) and costumer specification
EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them

Follow-up of the tests in the qualification phase
 Represent the project team during the qualifying tests, ensure that the tests are carried out in accordance with the test plan and solve the potential problems due to the equipment
 Contribution to the development and improvement of testing facilities, creation and validation of new test methodologies. Proposals for investments in testing facilities.

Eingesetzte Qualifikationen

Reporting, FMEA (Failure Mode and Effects Analysis)

EMC engineer on Gear Motor Generator
VALEO, CRETEIL
1/2018 – 5/2018 (5 Monate)
Automobilindustrie
Tätigkeitszeitraum

1/2018 – 5/2018

Tätigkeitsbeschreibung

EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them
Investigation of defects and limits exceeding in order to solve it during the prototyping phase
 Realization of electrical tests and simulations (LTspice, Simitrix) to highlight the reasons for emission exceeding and immunity defects
 Proposal of solutions and improvements ( filter design, layout improvement…) to ensure product compliance and optimize the solution with the design team
 Writing the investigation test report and presenting and explaining the results to design and project teams

Eingesetzte Qualifikationen

Reporting, FMEA (Failure Mode and Effects Analysis), Systems Simulation

EMC engineer on a heating system
VALEO, CRETEIL
9/2016 – 9/2017 (1 Jahr, 1 Monat)
Automobilindustrie
Tätigkeitszeitraum

9/2016 – 9/2017

Tätigkeitsbeschreibung

Technical adviser for project teams on EMC issues:
 Analysis of customer’s specifications, participation to technical discussions, assessment of the EMC emission and immunity risks and producing the EMC preliminary risk analysis report
 Analysis of equipment characteristics and development of the test setups and writing the test plan based on the international standards (CISPR, ISO, EN 61000-4-x ...) and costumer specification
 EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them
 Investigation of defects and limits exceeding in order to solve it during the prototyping phase
 Realization of electrical tests and simulations (LTspice, Simitrix) to highlight the reasons for emission exceeding and immunity defects
 Proposal of solutions and improvements ( filter design, layout improvement…) to ensure product compliance and optimize the solution with the design team
 Writing the investigation test report and presenting and explaining the results to design and project teams
 Follow-up of the tests in the qualification phase
 Represent the project team during the qualifying tests, ensure that the tests are carried out in accordance with the test plan and solve the potential problems due to the equipment
 Contribution to the development and improvement of testing facilities, creation and validation of new test methodologies. Proposals for investments in testing facilities.

Eingesetzte Qualifikationen

Reporting, FMEA (Failure Mode and Effects Analysis), Technisches Testing, Technisches Testmanagement / Testkoordination, Systems Simulation

EMC engineer - On board charger (OBC) (Festanstellung)
Valeo, Creteil
9/2016 – 9/2017 (1 Jahr, 1 Monat)
Automobilindustrie
Tätigkeitszeitraum

9/2016 – 9/2017

Tätigkeitsbeschreibung

Technical adviser for project teams on EMC issues:
 Analysis of customer’s specifications, participation to technical discussions, assessment of the EMC emission and immunity risks and producing the EMC preliminary risk analysis report
 Analysis of equipment characteristics and development of the test setups and writing the test plan based on the international standards (CISPR, ISO, EN 61000-4-x ...) and costumer specification
EMC design support for equipment under development:
 Analysis of functions and electrical diagrams to develop the self-compatibility matrix
 Writing the layout specification, review the layout on electronic boards with regards to the EMC design rules and suggestion of the necessary layout improvement to the design team
 Management of the EMC risk (emission, immunity ESD and ISO pulses) in the design and advising the project teams concerning the EMC issues and the solution to implement to avoid them
Investigation of defects and limits exceeding in order to solve it during the prototyping phase
 Realization of electrical tests and simulations (LTspice, Simitrix) to highlight the reasons for emission exceeding and immunity defects
 Proposal of solutions and improvements ( filter design, layout improvement…) to ensure product compliance and optimize the solution with the design team
 Writing the investigation test report and presenting and explaining the results to design and project teams

Eingesetzte Qualifikationen

FMEA (Failure Mode and Effects Analysis), Projekt - Berichtswesen, Prüfingenieur, Prüfmittelmanagement, Prüfwerkzeuge

EMC engineer focused testing and 3D electromagnetic simulation
EMITECH, Periou, SNCF, ANGERS
1/2016 – 9/2017 (1 Jahr, 9 Monate)
High-Tech- und Elektroindustrie
Tätigkeitszeitraum

1/2016 – 9/2017

Tätigkeitsbeschreibung

Project manager and technical advisor on EMC issues
 Receipt of requests, value accurately the scope and the required involvement of the company and produce the necessary quotations that meet the customers’ requirements
 Performing the EMC test, simulation, and produce high quality technical reports and EMC test plans (based on EN 61000-4x, CISPR, ISO) and procedures in the specified deadline.
 Numerical simulation technical leader
 Analysis of the EMC of radio communication systems (UHF, VHF, Radar, GPS ...) on a ship by calculation of the different electromagnetic couplings and calculation of field levels in order to estimate the radiation hazards on people, aircraft , fuels and ammunition (respectively DREP, DREA, DREC, DRAM risks)
 Evaluation of the CST’s Cable suite by comparing simulation and measurement results and discussing the obtained results with CST’s French branch teams
 Development and prototyping of antennas
 Simulation of the electromagnetic effects of lightning on various buildings and naval structures
 Composite materials technical leader
 Produce the necessary quotations that meet the customers’ requirements
 Characterization of the electromagnetic properties of various types of materials (pyramidal absorbers, radomes ...)
 Simulation of the magnetic material shielding and saturation behavior and synthesis of a shielding solution for a high magnetic field level environment
 Writing the necessary procedures for measuring the electromagnetic properties of composite materials for mainly aeronautical use
 Participation in a STACEM invitation to tender concerning a support mission for the design of a catalog of electromagnetic absorbing materials.
 EMC design support
 Modeling of the wave forms of RTCA DO-160 standard’s sections 19 and 22 and evaluating the immunity risk on a latch up circuit components
 EMC filters characterization
 EMC filter synthesis for a DC/DC converter and analysis of its performance on emission and immunity EMC tests
 Technical advisor on railway EMC
 EMC support in the Great Paris metro line 18 project: participation in steering and monitoring meetings of the project, proposal of measurement campaigns to ensure compliance of the line with standards and the regulations (ANFR protocol, Council Recommendation n ° 1999/519 / EC of 12/07/99, EN 50121-x rail standards)
 Working with ICAR, IGIS and SGP (consortium partners and project head) to solve the problems
 Identification of EMC risks, particularly on local systems, writing technical notes on the initial state measurements and study of the line’s EMC impact, managing the teams in charge of the tests
 Participation in tender notices for railway projects (extension of an SNCF station in Saint-Denis, analysis of interactions between the Saclay’s laboratories and Paris metro line 18 project)
 Simulation of shielding effectiveness of railroad signal bungalows for the SNCF and the magnetic field level radiated by the supplying rail
Assystem from 03/2015 to 10/2015: EMC Engineer
Lead of the EMC and electrical tests compliance regarding PSA’s requirements
 Participation to the upstream definition of the EMC technical specifications:
 Considering the environment of the equipment,
 Listing the potential disturbers and the type of disturbances
 Checking the application of the EMC test criterion.
 Technical coordinating and monitoring of suppliers and EMC recommendations upstream project.
 Definition and validation of the EMC test plan
 Analysis and validation of EMC test results on the table
 Familiar with the electrical and EMC test specifications applied to automotive (especially PSA Peugeot Citroen and Renault) electrical and electronic equipment.

Eingesetzte Qualifikationen

Reporting, FMEA (Failure Mode and Effects Analysis), Technisches Testing, Systems Simulation, 3d office

Zertifikate

PhD in electronics
2015
Master in electronics
2011

Weitere Kenntnisse

Simulation tools
FEKO, CST Microwave studio, HFSS, FLUX 2D&3D, Simitrix, LTspice Matlab
Measurement apparatus
VNA, spectrum analyzer, synthesizer, oscilloscope, antennas…
Standards
EN 61000-4x, CISPR25, CISPR 11, IEC 61980, automotive specification (PSA, Renault, WV…) ANFR protocol, Council Recommendation n ° 1999/519 / EC of 12/07/99, ISO 7637

Persönliche Daten

Sprache
  • Englisch (Fließend)
  • Französisch (Muttersprache)
  • Deutsch (Grundkenntnisse)
  • Arabisch (Fließend)
Reisebereitschaft
Europa
Arbeitserlaubnis
  • Europäische Union
  • Schweiz
Home-Office
bevorzugt
Profilaufrufe
2673
Alter
38
Berufserfahrung
12 Jahre und 9 Monate (seit 02/2012)

Kontaktdaten

Nur registrierte PREMIUM-Mitglieder von freelance.de können Kontaktdaten einsehen.

Jetzt Mitglied werden